Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.     

Thick bone section preparation using a silicon-rubber-based sealant

A method has been developed, using a silicon-rubber-based sealant, which allows 2–3-mm-thick specimens to be maintained in a protected fluid environment for a number of months, without risk of dehydration. Following this, the specimen can be retrieved, stained, embedded and sectioned further. For example, 2-mm-thick sections of fixed unstained bone are easily examined by means of epi-illuminated polarized light and fluorescence microscopies using either conventional or confocal optics. The method could easily be extended to other tissues, for example brain tissue.     

三维立体成像及其应用

本文首先介绍了三种传统的主要三维立体成像方法，即透镜板三维成像方法，投影式三维显示和全息照相术，其次，重点对于采用计算机产生的三维立体景象的方法进行了综述，其中包括人们近年来研究较多的自动立体成像技术等，最后给出了三维立体成像技术在航空航天，工业，教育，医学，军事等领域的应用实例，并预测了三维立体成像技术今后的主要发展方向。     

QFD质量职能扩展简介

介绍ＱＦＤ（质量职能扩展）的发展历史及其具体的操作过程。     

Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

共晶强制性熔化的界面形态

对透明共晶系ＣＢｒ４－８．４ｗｔ－％Ｃ２Ｃ１６生长的典型层片共晶组织强制熔化进行实时实地观测．表明相对于强制生长时的“界面滞后”现象，熔化界面温度高于静止时界面温度，熔化界面比静止界面更靠近热端，称为“界面超前”．随熔化速度增大，“界面超前量”增大；共晶组织分层熔化，出现两个熔化界面，α和β相熔化秩序不同，α，β相分别单独熔化，两熔化界面的相对位置由α，β相成分，熔化速度和共晶相间距等因素决定．     

An approach to automatic display layout using combinatorial optimization algorithms

The introduction of automatic display layout (ADL), i.e. the automatic placing and sizing of windows in a window-oriented graphical user interface, is a major contribution towards an improved user interface. Our approach to ADL is to treat this problem as a combinatorial optimization problem. In this article we describe the concepts we used for implementing an experimental system which controls the computer screen contents and its layout. We give two examples of different standard applications into which we included ADL successfully, namely hypertext for a window layout problem and graph-browser for a hierarchical graph layout problem within a particular window. The results show that automatic (and tool independent) display layout will be possible in the near future even in an interactive environment.     

Deep Web 研究现状与展望

随着Deep Web数量和规模的快速增长,通过对其发起查询请求以得到存储在后台数据库中的相关信息,日渐成为用户获取信息的主要方式。为了方便用户有效地利用Deep Web中的信息,越来越多的研究者致力于这一领域的研究,重点之一是Deep Web后台数据库的数据集成。由于Deep Web后台数据库存储的主要是文本信息,使得从文本处理角度出发,针对Deep Web中存储的内容进行查询与检索的研究具有十分广阔的应用前景。本文对Deep Web的研究现状进行了较为详细的分析,同时对研究的发展方向进行了展望。     

基于ADV7120的嵌入式VGA接口设计与实现

介绍了一种基于ADV7120的嵌入式VGA接V1设计与实现的方法,对扫描式TFT-LCD接口时序与VGA接口时序进行了分析对比,利用S3C2440A的LCD控制器和高性能视频D／A芯片ADV7120将扫描式TFT-LCD接口转换成VGA接口,给出了转换电路原理图和LCD控制寄存器的配置方法。实验结果表明：采用这种方法可以正确输出VGA同步信号和图像数据信号,VGA显示器图像清晰稳定,满足系统要求。     

碳化硅增强钛合金基复合材料热残余应力的有限元分析

为探寻热解碳层对涂碳SiC纤维增强Ti-15-3钛合金基复合材料（C-SiC/Ti-15-3）中热残余应力的影响,基于复合材料细观力学方法,建立在不同热解碳层厚度时C-SiC/Ti-15-3复合材料的有限元单胞模型,模拟复合材料中热残余应力的分布.研究发现,在SiC纤维表面增加碳涂层能明显降低复合材料中的热残余应力,SiC表面的热解碳层厚度对复合材料中的热残余应力有很大影响;随着热解碳层厚度的增加,最大von Mises等效应力和径向应力呈现先减小后增大的趋势.